|
|
 |
Forks & Carriages
Pipe And Pole Forks (PPF) - Atlanta Equipment offers nine models
of fork carriages providing durability, functionality and versatility
to your wheel loader. Features include adjustable tine spacing,
variety of carriage and fork lengths, fork locks, optional hydraulic
fork positioners and optional side shift. |
 |
Pipe And Pole Forks (PPFTC) - We offer five models with single
or double top clamp designed to hold 2 inch (51mm) to 48 inch
(1,219 mm) diameter pipe in position prohibiting damage. This
is an excellent tool for pipe yard and utility contractor applications. |
 |
Pipe And Pole Grapple (PG) - Our pipe and pole grapple is designed for large wheel loaders. Grapple product range will handle pipe and pole diameters from 43 inches (1,092 mm) to 60 inches (1,524 mm) diameter |
 |
Bucket Forks can adapt to any loader bucket allowing greater
overall machine utilization |
 |
Mill Yard Carriage has been designed specifically for the
lumber yard. features hydraulically actuated backrest and side
shift for maximum material handling and reduced product damage. |
 |
Guest Industries Forks
FABRICATED 3 POINT HITCH FORKS
- Rugged tubular design
- Tines and uprights are drilled for attachment of timbers
- Tips slope down for easier loading
SPECIFICATIONS - MODEL 3P-1500
| Rated Lift Capacity (lbs.)* | 1,500 |
| Usable Tine Length (in.) | 36 |
| Vertical Height (in.) | 24 |
| Tine Spacing, Outside (in.) | 30 |
| Tine Width (in.) | 3 |
| Tine Thickness (in.) | 2 |
| Net Weight (lbs.) | 91 |
| *Rating is based on ½ of load at mid-length of each tine. Design safety factor is 100% above rating. |
FABRICATED FORKS CUSTOM DESIGNED FOR SPECIAL APPLICATIONS
- Forks designed for 35,000 lbs. rated lift capacity. Tines have fixed spacing. Back columns are 96" high. Used for handling stacks of crushed auto bodies.
- Forks designed for 10,000 lbs. rated lift capacity. Tines have fixed spacing and are 16 ft. long. Used for handling automobiles lengthwise.
- Forks designed for 45,000 lbs. rated lift capacity. Tine spacing is adjustable. This set of forks was made to fit a Cat 988B. All forks are made with adapters custom designed to fit the loader.
|
|
 |
FABRICATED TOP MOUNTED FORKS
- On and off in seconds-by rolling bucket
- Tie-back chains hold forks back when withdrawing from under load (optional)
- Fork spacing easily adjusted
- When detached, forks stand ready for easy remounting
- No gusset or radius to interfere with square load
SPECIFICATIONS
| Model | 20 | 40S | 40L | 60C | 70S | 70L | 100 | 150 | 250 |
| Rated Lifting Capacity (lbs.) | 2,000 | 4,000 | 4,000 | 6,000 | 7,000 | 7,000 | 10,000 | 15,000 | 25,000 |
| Fits Vertical Bucket Opening (in.) | 22-31 | 24-35 | 30-41 | 36-52 | 26-42 | 36-52 | 40-62 | 50-68 | 64-80 |
| Useable Tine Length (in.) | 36 | 42 | 42 | 60 | 45 | 45 | 48 | 52 | 72 |
| Riser Height (in.) | 36 | 41 | 47 | 54 | 44 | 54 | 68 | 72 | 85 |
| Tine Tip Thickness (in.) | 3/8 | 3/8 | 3/8 | 1/2 | 5/8 | 5/8 | 3/4 | 3/4 | 1 |
| Max. Tine Thickness (in.) | 2 | 2 | 2 | 3 | 2 3/8 | 2 3/8 | 2 3/4 | 3 | 5 |
| Tine Taper Length (in.) | 6 | 6 | 6 | 46 | 34 | 34 | 37 | 43 | 56 |
| Tine Width (in.) | 3 | 4 | 4 | 5 | 5 | 5 | 6 | 8 | 8 |
| Adj. Width (in.) | to 55 | to 76 | to 76 | to 76 | to 76 | to 76 | to 76 | to 76 | to 96 |
| Number of Mounting Brackets | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 5 |
| Net Weight (lbs.) | 174 | 287 | 297 | 472 | 426 | 442 | 722 | 963 | 1634 |
|
|
 |
FABRICATED LIP MOUNTED FORKS
- Ready to use in seconds
- Built-in manual clamp - no tools needed
- Handle at top of riser makes mounting and handling easy
- Riser allows load to be cradled to prevent movement when traveling
The clamps have a slide-able handle so that the forks may be mounted against the sides of the bucket when maximum spacing is needed. These forks are the least expensive and are very practical when loaders at several locations must use the same forks. They are also easy to store or remove from the jobsite if security is a problem.
SPECIFICATIONS
| Model | 1000 | 2000 | 3500 | 4000S | 4000B | 8000S | 8000B |
| Rated Lifting Capacity (lbs.) | 1,000 | 2,000 | 3,500 | 4,000 | 4,000 | 8,000 | 8,000 |
| Useable Tine Length (in.) | 36 | 36 | 48 | 42 | 42 | 48 | 48 |
| Riser Height (in.) | 10 | 10 | 12 | 12 | 12 | 17 | 17 |
| Tine Tip Thickness (in.) | 1/4 | 3/8 | 1/2 | 1/2 | 1/2 | 3/4 | 3/4 |
| Max. Tine Thickness (in.) | 1 1/4 | 2 | 2 1/4 | 2 1/4 | 2 1/4 | 2 3/4 | 2 3/4 |
| Tine Taper Length (in.) | 3 1/2 | 9 1/2 | 32 | 32 | 32 | 37 | 37 |
| Max. Bucket Lip Thickness (in.) | 1 | 1 3/8 | 1 3/4 | 1 3/4 | 2 1/4# | 1 7/8 | 2 1/2# |
| Tine Width (in.) | 2 | 3 | 4 | 4 | 4 | 6 | 6 |
| Net Weight per pair (lbs.) | 83 | 114 | 246 | 226 | 252 | 411 | 545 |
*Rating is based on 1/2 load halfway out on each tine. Each Fork is static load tested, Model 1000 to 200% of rating, Model 2000 to 300% of rating and Models 3500, 4000S, 4000B, 8000S and 8000B to 250% rating.
#Model 4000B and 8000B is designed for buckets with a BOLT-ON EDGE
|
|
|
|
